KranK CX Tall Barrel 0.65"
- SKU:
- KCXTB
Description
Krank 0.65" Barrel Bushings are sold as a Pair or 2 Pairs with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.65" - Bushing Diameter: 0.98"
Performance Under Pressure - The KranK Formula has quite a bit of adjustability. You can tighten the kingpin nut up to two full turns after snug to 'harden' or 'loosen' the feel of the durometer.
Keep in mind that the rounded edge typically goes towards the hanger of the skateboard truck and should fit snugly into the bushing seat. If there is some slop, you can try flipping the bushing over so that the shaper edge is against the hanger. This will often remove most of the slop for larger bushing seats.
Related Products
Krank CX Tall Cone 0.65"
$10.49
Krank 0.65" Cone Bushings are sold as a Pair with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.65" -...
APS CX Tall Barrel 0.65"
$9.49
APS Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.65" - Bushing Diameter: 0.98"
The APS compound is very lively, which...
WFB CX Tall Barrel 0.65"
$11.49
WFB 0.65" Barrel Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.65" - Bushing Diameter: 0.98"
The WFB formula will have a white powder...
Krank CX Short Barrel 0.55"
$9.99
Krank Barrel Bushings are sold as a Pair with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.55" - Bushing...
KranK Tall Barrel 0.75"
$10.99
Sold as Pair with Sticker.
.975" Dia x .75" High (24.77mm Dia x 19mm High)
For use in trucks that require Tall Bushings (such as Ronin, Bear Kodiak, Arsenal) TallBarr