Dual Kingpin Bushing Box

SKU:
B6565K93
MSRP: $84.50
$69.99
— You save $14.51

Description

This kit is specificaly designed for Dual Kingpin Skateboard Trucks. Lots of E-Skate brands use these trucks and they are traditionally unstable or too tight. Our kit helps the trucks work to thier full potential.

Bushing Duros Explained:

   APS 97.5a Box (Tightest) - Our hardest compound for riders looking for a very stiff setup with little carve and for our heavier riders. 

   Krank 96a Box (Tight) - This is typically for 200lb+ (91kg+) riders or for riders who prefer a stiffer setup with more stability and less carve.  

   Krank 93a Box (Medium) - Riders around 150lb - 200lb (68kg - 91kg) will usually like this option and we recommend this the most. This setup has a more carve than the 93/96 box while keeping the stable feel that a tighter setup would have.

   Krank 90a Box (Soft) - For Riders around 100lb - 150lb (45kb - 68kg) who want an easier turn than the 90/93 box. This setup is starting to get a lot easier to carve.

   Krank 87a Box (Softer) - Riders 100lb (45kg) and less recommended. This is our softest setup for this kit and is for our young riders or those who want the most carve possible. Our bushing shapes mixed with the Krank formula continue to keep the carve stable and predictable.

Pivot Cups:

   96a Green or Cracked Ice - Our pivot cups give you a nice buttery feel with no squeak! The WFB 96a has been our favorite formula and is a perfect fit for all riders. Need just Pivots? - DKP Common Pivot Cups

- Bushing Layout (With Split Duro) -

Truck Name Bushing Heights" -  (Slots 1234)
   
Backfire DKP 6465
Backfire Hammer 6566
Backfire Ranger X2 & X3 6566
Boundmotor 6565
Eovan 6565
Evolve 6464
Exway Atlas & Pro 6666
Flipsky DKP 6565
Gullwing - Sidewinder 6565
isinwheel v10 6666
Lyacon TRX 2.0 6565
Onsra Challenger 6565
Propel Pivot - DKP 6565
Shabordz DKP 6565
Tynee Explorer DKP 6565
Tynee Stinger DKP 6565
Verreal RS DKP 6565
Wowgo AT2 6666

FAQ & Notes:

NOTE! Meepo Hurricane Riders:  While the Meepo's are great E-Boards, we have found that they are 'twitchier' than other E-Boards and we suggest that you order a Duro harder than you think you need.  Please contact us if we can help you choose, and know that with what is provided in each kit, you can make the harder duro ride softer than you can make the softer duro ride harder.

What if I want my setup to carve more?

   - Try using the bonus cone bushing we supplied in the middle of the box in front position 4 (roadside). You can also use the flat washers on the barrels (position 3) if you need more carve. Don't be shy to play around with washer configuration. Make sure you get the kingpin nut snug enough to not loosen and don't tighten down to much (Making the bushing bulge excessively). 

Can I get my ride a bit more stable for speeds?

   - Krank is a great formula because it responds very well to how tight you make the kingpin. Make sure you use the cup washers on the barrels. If the bushing is becoming very bulged and you are still not happy with how your setup is performing. Give us a call or email and we will be more than happy to help.

Additional Notes:

All of our box kit setups maximize your boards stability and predictability. We have tested and hand picked our Bushing shapes, height and duros combos for each truck we have a box for. We have found our that if you make the front truck a bit easier to carve, it will make all the difference in the world. Our Chubby and FatCone shapes provide superb stability when on the board-side(bottom) slot while the barrel and cone bushings let you carve more on the road-side(top) bushing slots. Hope you love the upgraded setup!

 

Compatible Setups: Backfire Hammer - Backfire Ranger 2 & 3 - Boundmotor Eovan Evolve Flipsky 12" & 13.78" & 15.2" - Gullwing Trucks - Halo Beast - Meepo Hurricane - Metroboard - Miles Rampage - Onsra Ownboard Bamboo AT - Verreal RS - Vestar Blackhawk - Wowgo AT2 

View AllClose

Additional Information

Bushings:
9
Washers:
11
Pivot Cups:
4
Stickers:
4
9 Slot Box:
1
View AllClose