Bear

APS Barrel Longboard Bushings are sold as a Pair or 2 Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The APS compound is very lively, which offers high rebound with lots of control and lean...

Krank Barrel Bushings are sold as a Pair or 2 Pairs with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.6" - Bushing Diameter: 0.98" Performance Under Pressure - The KranK...

APS Cone Longboard Bushings are sold as a Pair or 2 Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The APS compound is very lively, which offers high rebound with lots of...

Sold as Pair with Sticker.  .975" Dia x .75" High (24.77mm Dia x 19mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 125lbs)...

FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97...

Sold as Pair with Sticker. Designed specifically for use in Paris Trucks as well as those that have a slightly larger bushing seat.  The slightly larger shape will fill that seat snugly, thus eliminating the chance of dead-space or...

Canon skateboard bushings are sold as a pair with a sticker and NO WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for...

Sold as Pair with Sticker. .975" Dia x .75" High (24.77mm Dia x 19mm High) For use in trucks that require Tall Bushings (such as Ronin, Bear Kodiak, Arsenal) TallBarrels offer the next step up in stability above the TallCones and are often used for a...

Krank Cone Bushings are sold as a Pair or 2 Pairs with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.6" - Bushing Diameter: 0.98" Performance Under Pressure - The KranK Formula...

WFB Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The WFB formula will have a white powder residue on the surface. This is a good thing and...

Sold as Pair, with small cup washers & a sticker Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm High) Stiffer bushings...

Sold as Pair with Flat Washers and Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  The...

Sold as Pair with Small Cupped Washers & a Sticker The ShortStreetCone / StreetCone setup is for those looking for a very carvy or surfy feel.  The ShortStreetCone / StreetBarrel setup is for those looking for a carvy or...

Sold as Pair with Large Flat Washers and a Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) Chubbys offer the highest stability of all the shapes we offer & work best in a truck that has a stepped bushing seat to take advantage...

Sold as Pair with Small Flat Washers and a Sticker.  The ShortStreetBarrel / StreetBarrel setup is for those looking for higher stability at higher speeds but still highly maneuverable.  The ShortStreetBarrel /...

Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a -...

Sold as Pair with a Sticker  .975" Dia x .75" High (24.77mm Dia x 19mm High) WFB rides a couple of points softer than they test, so order accordingly. Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs)...

Sold as Pair with Sticker.  .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs)...

Sold as Pair with Large Flat Washers & a Sticker!  Choose the Magnum shape if you're using Paris Trucks or any truck that has a slightly larger bushing seat.  The slightly larger shape will fill that seat snugly, thus eliminating the...

Check out Bear Vintage Recommended Products for more info on the trucks.  These Pivot Cups are sold as a pair and fit into Bear Vintage Trucks and are available in Green. The Dime Trick - Hold a dime between your thumb & finger and slot it...

Sold as Pair with a Sticker WFB ride a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs) and allow for a nice tight set-up...

Sold as Pair, with small flat washers & a sticker Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm High) Hard...

Magnum skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer...

Sold as Pair with Flat Washers and Sticker.   .975" Dia x .75" High (24.77mm Dia x 20mm High) TallFatCones have the same initial stability as a TallBarrel but as you lean, they offer progressively higher resistance the further you go.  The...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). Custom urethane blend. APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High). WFB rides a couple of points softer than they test, so order accordingly   Hard durometer bushings (95.5a - 93a) are for...

Check out Bear Grizzly Recommended Products for more info on the trucks.  WFB Pivot Cups are sold as a pair and fit into Bear Grizzly 5.01 & Later. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to...

Sold as Pair with Sticker.  .975" Dia x .75" High (24.77mm Dia x 19mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 125lbs)...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders...

Check out Polar Bear Recommended Products for more info on the trucks.  WFB Pivot Cups are sold as a pair and fit into Polar Bear Trucks. These pivots are available in Green and Blue Cracked Ice. Riptide's Premium WFB Pivot Cups are a perfect...

Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone in...

Sold as Pair w/Washers & a Sticker 1.10" Dia x .60" High (24.77mm Dia x 15.24mm High) WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over...

Sold as Pair with a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). KranK rides a couple of points softer than they test, so order accordingly. Harder KranK durometer bushings (93a) are for heavier-weight riders (over 140lbs) as...

Check out Bear Kodiak Recommended Products for more info on the trucks.  WFB Pivot Cups are sold as a pair and fit into Bear Kodiak Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). Custom urethane blend. WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for...

Sold as Pair with a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). Custom urethane blend.APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight...

Check out Bear Precision Recommended Products for more info on the trucks.  WFB Pivot Cups are sold as a pair and fit intoBear Precision Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your...