Gen. 6
Longboard 0.6" (No Chubby) (Uses Canon & Magnum) / Longboard 0.6" (No Chubby) (Uses Canon & Magnum)
https://www.riptidesports.com/pivot-cups/bear-gen-6-pivot-cup/
-
APS Cone 0.6"
$8.99Cone skateboard bushings are sold as a PAIR with a sticker and NO WASHERS are included: The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings...$8.99 -
APS FatCone 0.6"
$9.99FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included: The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97...$9.99 -
KranK Canon 0.6"
$9.99Sold as Pair with Sticker. Designed specifically for use in Paris Trucks as well as those that have a slightly larger bushing seat. The slightly larger shape will fill that seat snugly, thus eliminating the chance of dead-space or...$9.99 -
APS Canon 0.6"
$8.99Canon skateboard bushings are sold as a pair with a sticker and NO WASHERS are included: The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for...$8.99 -
KranK Cone 0.6"
$9.99Krank Cone Bushings are sold as a Pair or 2 Pairs with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.6" - Bushing Diameter: 0.98" Performance Under Pressure - The KranK Formula...$9.99 -
KranK FatCone 0.6"
$10.99Sold as Pair with Flat Washers and Sticker. .975" Dia x .60" High (24.77mm Dia x 15.24mm High) FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go. The...$10.99 -
WFB Cone 0.6"
$10.99Sold as Pair with Sticker. .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs)...$10.99 -
KranK Magnum 0.6"
$10.99Sold as Pair with Large Flat Washers & a Sticker! Choose the Magnum shape if you're using Paris Trucks or any truck that has a slightly larger bushing seat. The slightly larger shape will fill that seat snugly, thus eliminating the...$10.99 -
WFB Canon 0.6"
$10.99Sold as Pair with a Sticker WFB ride a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs) and allow for a nice tight set-up...$10.99 -
APS Magnum 0.6"
$8.99Magnum skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included: The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer...$8.99 -
WFB FatCone 0.6"
$11.99Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High). WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for...$11.99 -
Bear Gen 6 Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone in...$13.99 -
WFB Magnum 0.6"
$11.99Sold as Pair w/Washers & a Sticker 1.10" Dia x .60" High (24.77mm Dia x 15.24mm High) WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over...$11.99