Paris

APS Barrel Longboard Bushings are sold as a Pair or 2 Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The APS compound is very lively, which offers high rebound with lots of control and lean...

Krank Barrel Bushings are sold as a Pair or 2 Pairs with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.6" - Bushing Diameter: 0.98" Performance Under Pressure - The KranK...

APS Cone Longboard Bushings are sold as a Pair or 2 Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The APS compound is very lively, which offers high rebound with lots of...

FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97...

Sold as Pair with Sticker. Designed specifically for use in Paris Trucks as well as those that have a slightly larger bushing seat.  The slightly larger shape will fill that seat snugly, thus eliminating the chance of dead-space or...

Canon skateboard bushings are sold as a pair with a sticker and NO WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for...

Krank Cone Bushings are sold as a Pair or 2 Pairs with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.6" - Bushing Diameter: 0.98" Performance Under Pressure - The KranK Formula...

Sold as Pair with Large Cupped Washers and Sticker.   .975" Dia x .50" High (24.8mm Dia x 12.70mm High) Street Barrels offer the next step up in stability above the Cone shape.  The ShortStreetBarrel / StreetBarrel setup is...

Street Barrel skateboard bushings are sold as a PAIR with a sticker and LARGE CUP WASHERS are included:  Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound. Hard...

WFB Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The WFB formula will have a white powder residue on the surface. This is a good thing and...

Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...

Sold as Pair with Flat Washers and Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  The...

Street Cone skateboard bushings are sold as a PAIR with a sticker and SMALL CUP WASHERS are included:  Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet...

Sold as Pair with Sticker.  .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs)...

Sold as Pair with Large Flat Washers & a Sticker!  Choose the Magnum shape if you're using Paris Trucks or any truck that has a slightly larger bushing seat.  The slightly larger shape will fill that seat snugly, thus eliminating the...

Sold as Pair with Small Cupped Washers and a Sticker.   .975" Dia x .50" High (24.77mm Dia x 12.70mm High) Street Cones offer the lowest resistance and stability of the 5 shapes we offer, and can allow your trucks to easily achieve their full...

Sold as Pair with a Sticker WFB ride a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs) and allow for a nice tight set-up...

Magnum skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High). WFB rides a couple of points softer than they test, so order accordingly   Hard durometer bushings (95.5a - 93a) are for...

Sold as Pair with Large Flat Washers and Sticker.  Choose the Street FatCone when you're looking for a little higher resistance in lean than the Street Barrel will offer you!  The FatCone shape will offer a little more stability in your axle...

Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...

Sold as Pair with Large Flat Washers and a Sticker.   The Street Chubby provides a more stable platform when combined with either a Barrel or a Cone shaped Bushing.  If you're looking for more control while learning, or are simply looking...

Street FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE CUP WASHERS are included:  Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet...

Sold as Pair w/Washers & a Sticker 1.10" Dia x .60" High (24.77mm Dia x 15.24mm High) WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over...

Street Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound. Hard...

Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...

Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...